Difference between revisions of "Interconnection Network"

From gem5
Jump to: navigation, search
m (Missing '\' after '--network=garnet2.0')
 
(34 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
== Topology ==
+
The various components of the interconnection network model inside gem5's ruby memory system are described here.
  
−
The connection between the various controllers are specified via python files.
+
== How to invoke the network ==
−
* '''Related Files''':
 
−
**  '''src/mem/ruby/network/topologies/Pt2Pt.py'''
 
−
**  '''src/mem/ruby/network/topologies/Crossbar.py'''
 
−
** ''' src/mem/ruby/network/topologies/Mesh.py'''
 
−
**  '''src/mem/ruby/network/topologies/MeshDirCorners.py'''
 
−
** '''src/mem/ruby/network/Network.py'''
 
  
−
* '''Topology Descriptions''':
+
'''Simple Network''':
−
** '''Pt2Pt''': Each controller (L1/L2/Directory) is connected to every other controller via a direct link. This can be invoked from command line by '''--topology=Pt2Pt'''.
+
<pre>./build/ALPHA/gem5.debug \
−
** '''Crossbar''': Each controller (L1/L2/Directory) is connected to every other controller via one switch (modeling the crossbar). This can be invoked from command line by '''--topology=Crossbar'''.
+
                  configs/example/ruby_random_test.py \
−
** '''Mesh''': This topology requires the number of directories to be equal to the number of cpus. The number of routers/switches is equal to the number of cpus in the system. Each router/switch is connected to one L1, one L2 (if present), and one Directory. It can be invoked from command line by '''--topology=Mesh'''. The number of rows in the mesh '''has to be specified''' by '''--mesh-rows'''. This parameter enables the creation of non-symmetrical meshes too.
+
                  --num-cpus=16  \
−
** '''MeshDirCorners''': This topology requires the number of directories to be equal to 4.  number of routers/switches is equal to the number of cpus in the system. Each router/switch is connected to one L1, one L2 (if present). Each corner router/switch is connected to one Directory. It can be invoked from command line by '''--topology=MeshDirCorners'''. The number of rows in the mesh '''has to be specified''' by '''--mesh-rows'''.
+
                  --num-dirs=16  \
 +
                  --network=simple
 +
                  --topology=Mesh_XY  \
 +
                  --mesh-rows=4 </pre>
  
−
[[File:topology_overview.jpg|1000px|center]]
+
The default network is simple, and the default topology is crossbar.
  
−
* '''Optional parameters specified by the topology files (defaults in Network.py)''':
 
−
** '''latency''': latency of traversal within the link.
 
−
** '''weight''': weight associated with this link. This parameter is used by the routing table while deciding routes, as explained next in [[Ruby#Routing|Routing]].
 
−
** '''bw_multiplier''': used by simple network to model different link bandwidths. This parameter is specified in 1000th of a byte, and the individual link bandwidth = bw_multiplier x endpoint_bandwidth (specified in Network.py).
 
  
−
== Routing ==
+
'''Garnet network''':
 +
<pre>./build/ALPHA/gem5.debug \
 +
                      configs/example/ruby_random_test.py  \
 +
                      --num-cpus=16 \
 +
                      --num-dirs=16  \
 +
                      --network=garnet2.0 \
 +
                      --topology=Mesh_XY \
 +
                      --mesh-rows=4  </pre>
  
−
Based on the topology, shortest path graph traversals are used to populate ''routing tables'' at each router/switch. The default routing algorithm tries to choose the route with minimum number of link traversals. Links can be given weights in the topology files to model different routing algorithms. For example, in Mesh.py and MeshDirCorners.py Y-direction links are given weights of 2, while X-direction links are given weights of 1, resulting in XY traversals in a mesh. '''adaptive_routing''' (in src/mem/ruby/network/SimpleNetwork.py) can be enabled to make the simple network choose routes based on occupancy of queues at each output port.
 
  
  
−
== Flow-Control and Router Microarchitecture ==
+
== Topology ==
  
−
Ruby supports two network models, Simple and Garnet, which trade-off detailed modeling versus simulation speed respectively.
+
The connection between the various controllers are specified via python files.
 +
All external links (between the controllers and routers) are bi-directional. All internal links (between routers) are uni-directional -- this allows a per-direction weight on each link to bias routing decisions.
  
 
* '''Related Files''':
 
* '''Related Files''':
−
** src/mem/ruby/network/Network.py
+
** '''src/mem/ruby/network/topologies/Crossbar.py'''
−
** src/mem/ruby/network/simple
+
**  '''src/mem/ruby/network/topologies/CrossbarGarnet.py'''
−
**  src/mem/ruby/network/garnet/BaseGarnetNetwork.py
+
** ''' src/mem/ruby/network/topologies/Mesh_XY.py'''
−
**  src/mem/ruby/network/garnet/fixed-pipeline
+
** ''' src/mem/ruby/network/topologies/Mesh_westfirst.py'''
−
** src/mem/ruby/network/garnet/flexible-pipeline
+
**  '''src/mem/ruby/network/topologies/MeshDirCorners_XY.py'''
 +
**  '''src/mem/ruby/network/topologies/Pt2Pt.py'''
 +
** '''src/mem/ruby/network/Network.py'''
 +
** '''src/mem/ruby/network/BasicLink.py'''
 +
** '''src/mem/ruby/network/BasicRouter.py'''
  
−
=== Configuration and Setup ===
+
* '''Topology Descriptions''':
 +
** '''Crossbar''': Each controller (L1/L2/Directory) is connected to a simple switch. Each switch is connected to a central switch (modeling the crossbar). This can be invoked from command line by '''--topology=Crossbar'''.
 +
** '''CrossbarGarnet''': Each controller (L1/L2/Directory) is connected to every other controller via one garnet router (which internally models the crossbar and allocator). This can be invoked from command line by '''--topology=CrossbarGarnet'''.
 +
** '''Mesh_*''': This topology requires the number of directories to be equal to the number of cpus. The number of routers/switches is equal to the number of cpus in the system. Each router/switch is connected to one L1, one L2 (if present), and one Directory. The number of rows in the mesh '''has to be specified''' by '''--mesh-rows'''. This parameter enables the creation of non-symmetrical meshes too.
 +
*** '''Mesh_XY''': Mesh with XY routing. All x-directional links are biased with  a weight of 1, while all y-directional links are biased with a weight of 2. This forces all messages to use X-links first, before using Y-links. It can be invoked from command line by '''--topology=Mesh_XY'''
 +
*** '''Mesh_westfirst''': Mesh with west-first routing. All west-directional links are biased with  a weight of 1, al other links are biased with a weight of 2. This forces all messages to use west-directional links first, before using other links. It can be invoked from command line by '''--topology=Mesh_westfirst'''
 +
** '''MeshDirCorners_XY''': This topology requires the number of directories to be equal to 4.  number of routers/switches is equal to the number of cpus in the system. Each router/switch is connected to one L1, one L2 (if present). Each corner router/switch is connected to one Directory. It can be invoked from command line by '''--topology=MeshDirCorners_XY'''. The number of rows in the mesh '''has to be specified''' by '''--mesh-rows'''. The XY routing algorithm is used.
 +
** '''Pt2Pt''': Each controller (L1/L2/Directory) is connected to every other controller via a direct link. This can be invoked from command line by '''--topology=Pt2Pt'''.
  
−
The default network model in Ruby is the [[Ruby#Simple_Network|simple]] network.
+
<!-- http://www.gem5.org/graphics/ruby/figures/Topology_overview.jpg -->
−
[[Ruby#Garnet_Networks|Garnet]] fixed-pipeline or flexible-pipeline networks can be enabled by adding '''--garnet-network=fixed''', or '''--garnet-network=flexible''' on the command line, respectively.
 
  
−
* '''Configuration''':
+
http://pwp.gatech.edu/ece-synergy/wp-content/uploads/sites/332/2016/10/topologies.jpg
−
Some of the network parameters specified in Network.py are:
 
−
** '''number_of_virtual_networks''': This is the maximum number of virtual networks. The actual number of active virtual networks is determined by the protocol.
 
−
** '''control_msg_size''': The size of control messages in bytes. Default is 8. '''m_data_msg_size''' in Network.cc is set to the block size in bytes + control_msg_size.
 
−
** '''link_latency''': Latency of each link in cycles. This can be specified for each link from the topology files. Default is 1.
 
  
−
=== Simple Network ===
+
'''In each topology, each link and each router can independently be passed a parameter that overrides the defaults (in BasicLink.py and BasicRouter.py)''':
  
−
The simple network models hop-by-hop network traversal, but abstracts out detailed modeling within the switches.
+
* '''Link Parameters:'''
−
The switches are modeled in simple/PerfectSwitch.cc while the links are modeled in simple/Throttle.cc.  
+
** '''latency''': latency of traversal within the link.
−
The flow-control is implemented by monitoring the available buffers and available bandwidth in output links before sending.
+
** '''weight''': weight associated with this link. This parameter is used by the routing table while deciding routes, as explained next in [[Interconnection_Network#Routing|Routing]].
 +
** '''bandwidth_factor''': Only used by simple network to specify width of the link in bytes. This translates to a bandwidth multiplier (simple/SimpleLink.cc) and the individual link bandwidth becomes bandwidth multiplier x endpoint_bandwidth (specified in SimpleNetwork.py). In garnet, the bandwidth is specified by ni_flit_size in GarnetNetwork.py)
  
−
[[File:Simple_network.jpg|200px|center]]
+
** '''Internal Link Parameters:'''
 +
** '''src_outport''': String with name for output port from source router.
 +
** '''dst_inport''': String with name for input port at destination router.
 +
These two parameters can be used by routers to implement custom routing algorithms in garnet2.0 (see [[Interconnection_Network#Routing|Routing]].
  
−
* '''Configuration''':
+
* '''Router Parameters:'''
−
Simple network uses the generic network parameters in Network.py. Additional parameters are specified in SimpleNetwork.py:
+
** '''latency''': latency of each router. Only supported by garnet2.0.
−
** '''buffer_size''': Size of buffers at each switch input and output ports. A value of 0 implies infinite buffering.
 
−
** '''endpoint_bandwidth''': Bandwidth at the end points of the network in 1000th of byte.
 
−
** '''bw_multiplier''': Bandwidth specified in 1000th of byte. The individual link bandwidth becomes bw_multipler x endpoint_bandwidth.
 
−
** '''adaptive_routing''': This enables adaptive routing based on occupancy of output buffers.
 
  
−
=== Garnet Networks ===
+
== Routing ==
  
−
Garnet is a detailed interconnection network model inside GEM5. It consists of a detailed ''fixed-pipeline'' model, and an approximate ''flexible-pipeline'' model.  
+
'''Table-based Routing (Default): '''
 +
Based on the topology, shortest path graph traversals are used to populate ''routing tables'' at each router/switch. This is done in src/mem/ruby/network/Topology.cc
 +
The default routing algorithm is table-based and tries to choose the route with minimum number of link traversals. Links can be given weights in the topology files to model different routing algorithms. For example, in Mesh_XY.py and MeshDirCorners_XY.py Y-direction links are given weights of 2, while X-direction links are given weights of 1, resulting in XY traversals.
 +
In Mesh_westfirst.py, the west-links are given weights of 1, and all other links are given weights of 2. In garnet2.0, the routing algorithm randomly chooses between links with equal weights. In simple network, it statically chooses between links with equal weights.
  
−
The ''fixed-pipeline'' model is intended for low-level interconnection network evaluations and models the detailed micro-architectural features of a 5-stage Virtual Channel router with credit-based flow-control. Researchers interested in investigating different network microarchitectures can readily modify the modeled microarchitecture and pipeline. Also, for system level evaluations that are not concerned with the detailed network characteristics, this model provides an accurate network model and should be used as the default model.
+
'''Custom Routing algorithms: '''
 +
In garnet2.0, we provide additional support to implement custom (including adaptive) routing algorithms (See outportComputeXY() in src/mem/ruby/network/garnet2.0/RoutingUnit.cc).
 +
The src_outport and dst_inport fields of the links can be used to give custom names to each link (e.g., directions if a mesh), and these can be used inside garnet to implement any routing algorithm.
 +
A custom routing algorithm can be selected from the command line by setting --routing-algorithm=2. See configs/network/Network.py and src/mem/ruby/network/garnet2.0/GarnetNetwork.py
  
−
The ''flexible-pipeline'' model is intended to provide a reasonable abstraction of all interconnection network models, while allowing the router pipeline depth to be flexibly adjusted. A router pipeline might range from a single cycle to several cycles. For evaluations that wish to easily change the router pipeline depth, the ''flexible-pipeline'' model provides a neat abstraction that can be used.
+
== Flow-Control and Router Microarchitecture ==
  
−
If your use of Garnet contributes to a published paper, please cite the research paper which can be found [http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4919636 here].
+
Ruby supports two network models, Simple and Garnet, which trade-off detailed modeling versus simulation speed respectively.
−
 
 
−
* '''Configuration'''
 
−
Garnet uses the generic network parameters in Network.py. Additional parameters are specified in BaseGarnetNetwork.py:
 
−
** '''flit_size''': flit size in bytes. Flits are the granularity at which information is sent from one router to the other. Default is 16 (=> 128 bits). [This default value of 16 results in control messages fitting within 1 flit, and data messages fitting within 5 flits].
 
−
** '''vcs_per_class''': number of virtual channels (VC) per message class (Note: message class = virtual network). Default is 4.
 
−
 
 
−
The following are only valid for fixed-pipeline:
 
−
** '''buffers_per_data_vc''': number of flit-buffers per VC in the data message class. Since data messages occupy 5 flits, this value can lie between 1-5. Default is 4.
 
−
** '''buffers_per_ctrl_vc''': number of flit-buffers per VC in the control message class. Since control messages occupy 1 flit, and a VC can only hold one message at a time, this value has to be 1. Default is 1.
 
−
Note: garnet assumes that ctrl messages are 1-flit wide. If ctrl flits occupy more than one flit (due to smaller flit-size, or larger control_msg_size), all VCs are given buffers_per_data_vc number of flit-buffers.
 
−
 
 
−
The following are only valid for flexible-pipeline:
 
−
** '''number_of_pipe_stages''': number of pipeline stages in each router in the flexible-pipeline model. Default is 4.
 
  
 +
=== Simple Network ===
  
−
* '''Additional features'''
+
Details of the Simple Network are '''[[simple|here]]'''.
−
** '''Routing''': Currently, garnet only models deterministic routing using the routing tables described [[Ruby#Routing|earlier]].
 
−
** '''Modeling variable link bandwidth''': The flit size specifies the link bandwidth as the number of bytes per cycle per network link. Links which have lower bandwidth than this (for instance some off-chip links) can be modeled by specifying a longer latency across them in the topology file (as explained [[Ruby#Topology|earlier]]).
 
−
** '''Multicast messages''': The network modeled does not have hardware multi-cast support within the network. A multi-cast message gets broken into multiple uni-cast messages at the interface to the network.  
 
  
 +
=== Garnet ===
  
−
* '''Garnet fixed-pipeline network'''
+
Details of the original (2009) Garnet network are '''[[garnet|here]]'''.
 +
This design is no longer supported in the codebase.
  
−
The garnet fixed-pipeline models a classic 5-stage Virtual Channel router. The 5-stages are:
+
=== Garnet2.0 ===
−
# '''Buffer Write (BW) + Route Compute (RC)''': The incoming flit gets buffered and computes its output port.
 
−
# '''VC Allocation (VA)''': All buffered flits allocate for VCs at the next routers. [The allocation occurs in a ''separable'' manner: First, each input VC chooses one output VC, choosing input arbiters, and places a request for it. Then, each output VC breaks conflicts via output arbiters]. All arbiters in ordered virtual networks are ''queueing'' to maintain point-to-point ordering. All other arbiters are ''round-robin''.
 
−
# '''Switch Allocation (SA)''': All buffered flits try to reserve the switch ports for the next cycle. [The allocation occurs in a ''separable'' manner: First, each input chooses one input VC, using input arbiters, which places a switch request. Then, each output port breaks conflicts via output arbiters]. All arbiters in ordered virtual networks are ''queueing'' to maintain point-to-point ordering. All other arbiters are ''round-robin''.
 
−
# '''Switch Traversal (ST)''': Flits that won SA traverse the crossbar switch.
 
−
# '''Link Traversal (LT)''': Flits from the crossbar traverse links to reach the next routers.
 
  
−
The flow-control implemented is credit-based.
+
Details of the new (2016) Garnet2.0 network are '''[[garnet2.0|here]]'''.
  
−
[[File:Garnet_router.jpg|500px|center]]
 
  
 +
== Running the Network with Synthetic Traffic ==
  
−
* '''Garnet flexible-pipeline network'''
+
The interconnection networks can be run in a standalone manner and fed with synthetic traffic.
 +
We recommend doing this with garnet2.0.
  
−
The garnet flexible-pipeline model should be used when one desires a router pipeline different than 5 stages (the 5 stages include the link traversal stage).
+
'''[[Garnet_Synthetic_Traffic | Running Garnet Standalone with Synthetic Traffic]]'''
−
All the components of a router (buffers, VC and switch allocators, switch etc) are modeled similar to the fixed-pipeline design, but the pipeline depth is not modeled, and comes as an input parameter '''number_of_pipe_stages'''.
 
−
The flow-control is implemented by monitoring the availability of buffers at each output port before sending.
 

Latest revision as of 08:56, 7 November 2017

The various components of the interconnection network model inside gem5's ruby memory system are described here.

How to invoke the network

Simple Network: 

./build/ALPHA/gem5.debug \
                  configs/example/ruby_random_test.py \
                  --num-cpus=16  \
                  --num-dirs=16  \
                  --network=simple
                  --topology=Mesh_XY  \
                  --mesh-rows=4

The default network is simple, and the default topology is crossbar.


Garnet network: 

./build/ALPHA/gem5.debug \
                      configs/example/ruby_random_test.py  \
                      --num-cpus=16 \
                      --num-dirs=16  \
                      --network=garnet2.0 \
                      --topology=Mesh_XY \
                      --mesh-rows=4


Topology

The connection between the various controllers are specified via python files. All external links (between the controllers and routers) are bi-directional. All internal links (between routers) are uni-directional -- this allows a per-direction weight on each link to bias routing decisions.

  • Related Files:
    • src/mem/ruby/network/topologies/Crossbar.py
    • src/mem/ruby/network/topologies/CrossbarGarnet.py
    • src/mem/ruby/network/topologies/Mesh_XY.py
    • src/mem/ruby/network/topologies/Mesh_westfirst.py
    • src/mem/ruby/network/topologies/MeshDirCorners_XY.py
    • src/mem/ruby/network/topologies/Pt2Pt.py
    • src/mem/ruby/network/Network.py
    • src/mem/ruby/network/BasicLink.py
    • src/mem/ruby/network/BasicRouter.py
  • Topology Descriptions:
    • Crossbar: Each controller (L1/L2/Directory) is connected to a simple switch. Each switch is connected to a central switch (modeling the crossbar). This can be invoked from command line by --topology=Crossbar.
    • CrossbarGarnet: Each controller (L1/L2/Directory) is connected to every other controller via one garnet router (which internally models the crossbar and allocator). This can be invoked from command line by --topology=CrossbarGarnet.
    • Mesh_*: This topology requires the number of directories to be equal to the number of cpus. The number of routers/switches is equal to the number of cpus in the system. Each router/switch is connected to one L1, one L2 (if present), and one Directory. The number of rows in the mesh has to be specified by --mesh-rows. This parameter enables the creation of non-symmetrical meshes too.
      • Mesh_XY: Mesh with XY routing. All x-directional links are biased with a weight of 1, while all y-directional links are biased with a weight of 2. This forces all messages to use X-links first, before using Y-links. It can be invoked from command line by --topology=Mesh_XY
      • Mesh_westfirst: Mesh with west-first routing. All west-directional links are biased with a weight of 1, al other links are biased with a weight of 2. This forces all messages to use west-directional links first, before using other links. It can be invoked from command line by --topology=Mesh_westfirst
    • MeshDirCorners_XY: This topology requires the number of directories to be equal to 4. number of routers/switches is equal to the number of cpus in the system. Each router/switch is connected to one L1, one L2 (if present). Each corner router/switch is connected to one Directory. It can be invoked from command line by --topology=MeshDirCorners_XY. The number of rows in the mesh has to be specified by --mesh-rows. The XY routing algorithm is used.
    • Pt2Pt: Each controller (L1/L2/Directory) is connected to every other controller via a direct link. This can be invoked from command line by --topology=Pt2Pt.


topologies.jpg

In each topology, each link and each router can independently be passed a parameter that overrides the defaults (in BasicLink.py and BasicRouter.py):

  • Link Parameters:
    • latency: latency of traversal within the link.
    • weight: weight associated with this link. This parameter is used by the routing table while deciding routes, as explained next in Routing.
    • bandwidth_factor: Only used by simple network to specify width of the link in bytes. This translates to a bandwidth multiplier (simple/SimpleLink.cc) and the individual link bandwidth becomes bandwidth multiplier x endpoint_bandwidth (specified in SimpleNetwork.py). In garnet, the bandwidth is specified by ni_flit_size in GarnetNetwork.py)
    • Internal Link Parameters:
    • src_outport: String with name for output port from source router.
    • dst_inport: String with name for input port at destination router.

These two parameters can be used by routers to implement custom routing algorithms in garnet2.0 (see Routing.

  • Router Parameters:
    • latency: latency of each router. Only supported by garnet2.0.

Routing

Table-based Routing (Default): Based on the topology, shortest path graph traversals are used to populate routing tables at each router/switch. This is done in src/mem/ruby/network/Topology.cc The default routing algorithm is table-based and tries to choose the route with minimum number of link traversals. Links can be given weights in the topology files to model different routing algorithms. For example, in Mesh_XY.py and MeshDirCorners_XY.py Y-direction links are given weights of 2, while X-direction links are given weights of 1, resulting in XY traversals. In Mesh_westfirst.py, the west-links are given weights of 1, and all other links are given weights of 2. In garnet2.0, the routing algorithm randomly chooses between links with equal weights. In simple network, it statically chooses between links with equal weights.

Custom Routing algorithms: In garnet2.0, we provide additional support to implement custom (including adaptive) routing algorithms (See outportComputeXY() in src/mem/ruby/network/garnet2.0/RoutingUnit.cc). The src_outport and dst_inport fields of the links can be used to give custom names to each link (e.g., directions if a mesh), and these can be used inside garnet to implement any routing algorithm. A custom routing algorithm can be selected from the command line by setting --routing-algorithm=2. See configs/network/Network.py and src/mem/ruby/network/garnet2.0/GarnetNetwork.py

Flow-Control and Router Microarchitecture

Ruby supports two network models, Simple and Garnet, which trade-off detailed modeling versus simulation speed respectively.

Simple Network

Details of the Simple Network are here.

Garnet

Details of the original (2009) Garnet network are here. This design is no longer supported in the codebase.

Garnet2.0

Details of the new (2016) Garnet2.0 network are here.


Running the Network with Synthetic Traffic

The interconnection networks can be run in a standalone manner and fed with synthetic traffic. We recommend doing this with garnet2.0.

Running Garnet Standalone with Synthetic Traffic

Retrieved from "http://daystrom.m5sim.org/wiki/index.php?title=Interconnection_Network&oldid=8287"