Difference between revisions of "General Memory System"
(Update CommMonitor section to work with newer gem5 versions.) |
|||
Line 76: | Line 76: | ||
===Traffic analysis and memory trace capture=== | ===Traffic analysis and memory trace capture=== | ||
− | The <code>CommMonitor</code> provides a range of monitoring capabilities, such as histograms for bandwidth, latency, outstanding transactions and burst size, address heat maps, etc. The monitor can be placed anywhere in the memory system by connecting it as a form of extension cord between two existing modules. For example <code>l2cache.mem_side = membus.slave</code> would turn into <code>l2cache.mem_side = l2mon.slave</code> and <code>l2mon.master = membus.slave</code>, assuming a monitor is already instantiated | + | The <code>CommMonitor</code> provides a range of monitoring capabilities, such as histograms for bandwidth, latency, outstanding transactions and burst size, address heat maps, etc. It also provides a well-defined probe interface to analyze packets as they are transferred through the memory system. Currently, gem5 comes with probes to trace memory accesses and compute stack distance histograms. The monitor can be placed anywhere in the memory system by connecting it as a form of extension cord between two existing modules. For example <code>l2cache.mem_side = membus.slave</code> would turn into <code>l2cache.mem_side = l2mon.slave</code> and <code>l2mon.master = membus.slave</code>, assuming a monitor is already instantiated. Check config.json or config.dot.pdf to ensure the monitors are instantiated as expected. |
− | To | + | To trace memory accesses, a <code>CommMonitor</code> needs to be attached to the memory system and a <code>MemTraceProbe</code> needs to be attached to the <code>CommMonitor</code>. To enable tracing in the probe, specify a <code>trace_file = 'mytrace.trc'</code> parameter. By appending '.gz' the trace will also be gzipped. For example:<br/> |
+ | <code> | ||
+ | monitor.trace = MemTraceProbe(trace_file="my_trace.trc.gz") | ||
+ | </code> | ||
+ | |||
+ | The output trace is using Google's protobuf to get a compact trace with a high-speed encoding/decoding. The trace can be dumped in human-readable format by using the utility script <code>util/decode_packet_trace.py</code>. The trace contains a time stamp, the command and flags of the request, the physical address, the size, and a generic ID. The traffic generator in gem5 also supports replaying these traces. | ||
=== Traffic generation and trace playback=== | === Traffic generation and trace playback=== |
Revision as of 09:49, 6 October 2015
gem5's memory system was designed to enable:
- Modularity and compartmentalisation through standard interfaces.
- Suitable interfaces for loosely-timed, approximately-timed and untimed transaction-level modelling.
- Flexibility to allow other memory interconnects besides a crossbar.
- A comprehensive set of building blocks, ranging from caches, crossbars, to full-blown DRAM controllers.
Contents
Ports system
MemObjects
All objects within a memory system inherit from MemObject
. This class adds the pure virtual functions getMasterPort(const std::string &name)
and getSlavePort(const std::string &name)
which returns a port corresponding to the given name. This interface is used to connect memory objects together.
Ports
Ports are used to interface memory objects to each other. They will always come in pairs and we refer to the other port object as the peer. A master port always connects to a slave port, with the master initiating requests, and the slave providing responses. Every memory object has to have at least one port to be useful.
There are two groups of functions in the port object. The send*
functions are called on the port by the object that owns that port. For example to send a request packet in the memory system a CPU would call myPort->sendTimingReq(pkt)
to send a packet. Each send function has a corresponding recv function that is called on the ports peer. So the implementation of the sendTimingReq()
call above would simply be peer->recvTimingReq(pkt)
. Using this method we only have one virtual function call penalty but keep generic ports that can connect together any memory system objects.
Connections
In Python, Ports are first-class attributes of simulation objects, much like Params. Two objects can specify that their ports should be connected using the assignment operator. Unlike a normal variable or parameter assignment, port connections are symmetric: A.port1 = B.port2
has the same meaning as B.port2 = A.port1
.
Objects such as busses that have a potentially unlimited number of ports use "vector ports". An assignment to a vector port appends the peer to a list of connections rather than overwriting a previous connection.
Port proxies
There are three types of port proxies that wrap the port interface and are used for initialisation and introspection.
-
PortProxy
provides easy to use methods for writing and reading physical addresses. It is only meant to load data into memory and update constants before the simulation begins. -
SETranslatingPortProxy
andFSTranslatingPortProxy
provide the same methods asPortProxy
, but the addresses passed to them are virtual addresses, and a translation is done to get the physical address.
Packets
A Packet is used to encapsulate a transfer between two objects in the memory system (e.g., the L1 and L2 cache). This is in contrast to a Request where a single Request travels all the way from the requester to the ultimate destination and back, possibly being conveyed by several different Packets along the way.
Read access to many packet fields is provided via accessor methods which verify that the data in the field being read is valid.
A packet contains the following all of which are accessed by accessors to be certain the data is valid:
- The address. This is the address that will be used to route the packet to its target (if the destination is not explicitly set) and to process the packet at the target. It is typically derived from the request object's physical address, but may be derived from the virtual address in some situations (e.g., for accessing a fully virtual cache before address translation has been performed). It may not be identical to the original request address: for example, on a cache miss, the packet address may be the address of the block to fetch and not the request address.
- The size. Again, this size may not be the same as that of the original request, as in the cache miss scenario.
- A pointer to the data being manipulated.
- Set by
dataStatic()
anddataDynamic()
, which controls if the data associated with the packet is freed when the packet is. - Allocated if not set by one of the above methods
allocate()
and the data is freed when the packet is destroyed. (Always safe to call). - A pointer can be retrived by calling
getPtr()
orgetConstPtr()
-
get()
andset()
can be used to manipulate the data in the packet. The get() method does a guest-to-host endian conversion and the set method does a host-to-guest endian conversion.
- Set by
- A list of Packet Command Attributes associated with the packet
- A
SenderState
pointer which is a virtual base opaque structure used to hold state associated with the packet but specific to the sending device (e.g., an MSHR). A pointer to this state is returned in the packet's response so that the sender can quickly look up the state needed to process it. A specific subclass would be derived from this to carry state specific to a particular sending device. - A pointer to the request.
Requests
A request object encapsulates the original request issued by a CPU or I/O device. The parameters of this request are persistent throughout the transaction, so a request object's fields are intended to be written at most once for a given request. There are a handful of constructors and update methods that allow subsets of the object's fields to be written at different times (or not at all). Read access to all request fields is provided via accessor methods which verify that the data in the field being read is valid.
The fields in the request object are typically not available to devices in a real system, so they should normally be used only for statistics or debugging and not as architectural values.
Request object fields include:
- Virtual address. This field may be invalid if the request was issued directly on a physical address (e.g., by a DMA I/O device).
- Physical address.
- Data size.
- Time the request was created.
- The ID of the CPU/thread that caused this request. May be invalid if the request was not issued by a CPU (e.g., a device access or a cache writeback).
- The PC that caused this request. Also may be invalid if the request was not issued by a CPU.
Atomic/Timing/Functional accesses
There are three types of accesses supported by the ports.
- Timing - Timing accesses are the most detailed access. They reflect our best effort for realistic timing and include the modeling of queuing delay and resource contention. Once a timing request is successfully sent at some point in the future the device that sent the request will get a response. Timing and Atomic accesses can not coexist in the memory system. This is similar to the TLM nb_transport interface.
- Atomic - Atomic accesses are a faster than detailed access. They are used for fast forwarding and warming up caches and return an approximate time to complete the request without any resource contention or queuing delay. When an atomic access is sent the response is provided when the function returns. Atomic and timing accesses can not coexist in the memory system. This is similar to the TLM b_transport interface (without any blocking).
- Functional - Like atomic accesses functional accesses happen instantaneously, but unlike atomic accesses they can coexist in the memory system with atomic or timing accesses. Functional accesses are used for things such as loading binaries, examining/changing variables in the simulated system, and allowing a remote debugger to be attached to the simulator. The important note is when a functional access is received by a device, if it contains a queue of packets all the packets must be searched for requests or responses that the functional access is effecting and they must be updated as appropriate. The
Packet::checkFunctionl()
is responsible for this.
Timing Flow control
Timing requests simulate a real memory system, so unlike functional and atomic accesses their response is not instantaneous. Because the timing requests are not instantaneous, flow control is needed. When a timing packet is sent via sendTiming()
the packet may or may not be accepted, which is signaled by returning true or false. If false is returned the object should not attempt to sent anymore packets until it receives a recvRetry()
call. At this time it should again try to call sendTiming()
; however the packet may again be rejected. Note: The original packet does not need to be resent, a higher priority packet can be sent instead.
Response and Snoop ranges
Ranges in the memory system are handled by having all slave ports provide an implementation for getAddrRanges
This method returns anAddrRangeList
with addresses it responds to. When these ranges change (e.g. from PCI configuration taking place) the device should call sendRangeChange
on its port so that the new ranges are propagated to the entire hierarchy. This is precisely what happens during init()
; all memory objects call sendRangeChange()
, and a flurry of range updates occur until everyones ranges have been propagated to all busses in the system.
Tracing and traffic generation
The memory system has a number of components that facilitate detailed tracing and traffic analysis, as well as traffic generation and trace playback.
Traffic analysis and memory trace capture
The CommMonitor
provides a range of monitoring capabilities, such as histograms for bandwidth, latency, outstanding transactions and burst size, address heat maps, etc. It also provides a well-defined probe interface to analyze packets as they are transferred through the memory system. Currently, gem5 comes with probes to trace memory accesses and compute stack distance histograms. The monitor can be placed anywhere in the memory system by connecting it as a form of extension cord between two existing modules. For example l2cache.mem_side = membus.slave
would turn into l2cache.mem_side = l2mon.slave
and l2mon.master = membus.slave
, assuming a monitor is already instantiated. Check config.json or config.dot.pdf to ensure the monitors are instantiated as expected.
To trace memory accesses, a CommMonitor
needs to be attached to the memory system and a MemTraceProbe
needs to be attached to the CommMonitor
. To enable tracing in the probe, specify a trace_file = 'mytrace.trc'
parameter. By appending '.gz' the trace will also be gzipped. For example:
monitor.trace = MemTraceProbe(trace_file="my_trace.trc.gz")
The output trace is using Google's protobuf to get a compact trace with a high-speed encoding/decoding. The trace can be dumped in human-readable format by using the utility script util/decode_packet_trace.py
. The trace contains a time stamp, the command and flags of the request, the physical address, the size, and a generic ID. The traffic generator in gem5 also supports replaying these traces.
Traffic generation and trace playback
The TrafficGen
module provides a generic framework for synthetic traffic generation and trace playback. Each traffic generator is independent, and has a single master port, through which requests are issued, and responses received. The traffic generator does not care about the data transported, and focuses solely on achieving a specific spatial (address) and temporal (inter-transaction time) distribution.
The specific behaviour of the traffic generator is controlled by a text-based configuration file. For an example of such a file, see tests/quick/se/70.tgen/tgen-simple-mem.cfg
. In essence the traffic generator is a probabilistic state-transition diagram, where each stats is a specific generator behaviour. The states, such as LINEAR, RANDOM, TRACE and DRAM can be combined into an elaborate graph, and each state also has a large range of configuration options.
Packet allocation protocol
The protocol for allocation and deallocation of Packet objects varies depending on the access type. (We're talking about low-level C++ new
/delete
issues here, not anything related to the coherence protocol.)
- Atomic and Functional
- The Packet object is owned by the requester. The responder must overwrite the request packet with the response (typically using the
Packet::makeResponse()
method). There is no provision for having multiple responders to a single request. Since the response is always generated beforesendAtomic()
orsendFunctional()
returns, the requester can allocate the Packet object statically or on the stack.
- Timing
- Timing transactions are composed of two one-way messages, a request and a response. In both cases, the Packet object must be dynamically allocated by the sender. Deallocation is the responsibility of the receiver (or, for broadcast coherence packets, the target device, typically memory). In the case where the receiver of a request is generating a response, it may choose to reuse the request packet for its response to save the overhead of calling
delete
and thennew
(and gain the convenience of usingmakeResponse()
). However, this optimization is optional, and the requester must not rely on receiving the same Packet object back in response to a request. Note that when the responder is not the target device (as in a cache-to-cache transfer), then the target device will still delete the request packet, and thus the responding cache must allocate a new Packet object for its response. Also, because the target device may delete the request packet immediately on delivery, any other memory device wishing to reference a broadcast packet past point where the packet is delivered must make a copy of that packet, as the pointer to the packet that is delivered cannot be relied upon to stay valid.
Two memory system models: Classic and Ruby
The gem5 simulator includes two different memory system models, Classic and Ruby, that incorporate the above mentioned general memory system components. As the name suggests, the Classic memory system model is inherited from the previous M5 simulator, while the Ruby memory system model is based on the GEMS memory system model of the same name. Each model is complementary and both have unique advantages and disadvantages. This sub-section introduces each model and compares their functionality. Then the next two respective top-level sections describe each model in detail.
Classic memory system
The Classic memory system model provides gem5 a fast, flexible and easily configurable memory system at the cost of detail in the coherency interactions. All objects within the Classic model inherit from MemObject
and connect together using ports. In particular, ports support direct point-to-point connections between two MemObjects
and buses/crossbars connect two or more MemObjects
together. Cache coherence is maintained using an abstract MOESI snooping protocol where state-transitions due to snoops occur instantaneously. Using this methodology, the Classic memory system model has the following advantages and disadvantages:
- Advantages
- Fast Forwarding - The Classic model supports atomic accesses, which as stated above, are faster than detailed accesses. This mode of operation is especially advantageous when one needs to fast forward to interesting parts of the execution. It is also the mode used when running gem5 in KVM mode.
- Speed - Not only does the Classic model support fast atomic accesses, but its timing accesses are relatively fast as compared to Ruby.
- Ease of Configuration - By simply modifying the python configuration, the Classic model allows one to create an arbitrary memory hierarchy. The Classic's abstract cache coherence protocol automatically extends to any memory hierarchy as long as it is composed of caches, crossbars, and bridges.
- Disadvantages
- Cache Coherence Flexibility - While the Classic model allows one to create arbitrary systems composed of caches, crossbars, and cpus, the Classic model is restricted to its abstract MOESI snooping protocol. Modifying the protocol requires significant effort.
- Cache Coherence Fidelity - By not modeling transient states, the Classic model does not model protocol contention as detailed as the Ruby model.
Ruby memory system
In contrast to the Classic model, the Ruby memory system model sacrifices simulation speed to provide gem5 a flexible infrastructure capable of accurately simulating a wide variety of memory systems. In particular, Ruby supports a domain specific language called SLICC (Specification Language for Implementing Cache Coherence) where one can define many different types of cache coherence protocols. Essentially SLICC defines the cache, memory, and dma controllers as individual per-memory-block state machines that together form the overall protocol. By defining the controller logic in a higher level language, SLICC allows different protocols to incorporate the same underlining state transition mechanisms with minimal programmer effort.
Unlike the Classic model, Ruby does not connect all objects together using ports. Instead, ports only connect cpus and devices to the memory system via the RubyPort
object. Then within the Ruby memory system, all objects are connected to each other via MessageBuffers
. MessageBuffers are similar to ports in that they provide objects a standard communication interface. However, MessageBuffers include a queue that stores messages while ports do not. Messages cannot be enqueued and dequeued at the same simulated cycle and thus communication across a message buffer is not instantaneous. The result is MessageBuffers only support timing accesses and cannot support the instantaneous atomic and functional accesses.
To summarize, the Ruby memory system model has the following advantages and disadvantages:
- Advantages
- Cache Coherence Flexibility - Utilizing SLICC, Ruby can implement a wide variety of cache coherence protocols, from directory to snooping protocols and several points in between.
- Fidelity - Ruby accurately models both cache coherence and network related features in the memory system. In particular, SLICC's message trigger event methodology accurately models transient state timing. Also the Garnet network model integrated in Ruby accurately models network contention and flow control.
- Disadvantages
- Fast Forwarding - Ruby does not support atomic accesses and thus does not have reasonable fast forwarding capability.
- Speed - As compared to the Classic model, Ruby is relatively slow. This is especially true when using the Garnet network model.
- Ease of Configuration - While SLICC is a powerful tool to model a wide variety of cache coherence protocols, the resulting protocols are optimized for a specific cache hierarchy configuration. As such, it is difficult to simply extend protocols to another level of cache.